Posted by Willem on Nov 07, 2012; 4:25pm
URL: https://forum.librecad.org/Line-Dividing-tp5707225p5707229.html

Hello Sladden,

1. Make a drawing of your “L”
2. Select Menu / Draw / Line / Parallel
3. In the commmandline, type the wanted distance between the lines (for example 20) and <Enter>
4. Move the cursor over one line in the drawing and a new line at a distance 20 mm will appear. Click to set the line.
5. Repeat moving the cursor and click for more lines.

Greetings,
Willem