Posted by dellus on Dec 19, 2017; 8:59pm
URL: https://forum.librecad.org/Dimension-styles-tp5715598p5715601.html

You can place the cyphers in the middle of the dimension line with "dimension line gap" (meaning distance text to dimension line)  = minus text height / 2, but the dimension line will not be cut out in aligned mode. As it works in horizontal mode, it seems not so difficult to code, but sadly it's not done.
Concerning the tick, you don't necessarily have to set the arrows to 0, if you give the tick a value more than 0 this overrides the arrow anyway.