Re: How to print at 1/4 inch = 1 foot scale?
Posted by susanmcclendon on Jun 30, 2019; 4:25pm
URL: https://forum.librecad.org/How-to-print-at-1-4-inch-1-foot-scale-tp5717550p5717552.html
URL: https://forum.librecad.org/How-to-print-at-1-4-inch-1-foot-scale-tp5717550p5717552.html
Thank you! It was not obvious that user-created scales could be entered, and none of the scales in the pull down list make any sense when using “architectural” units.
On Sun, Jun 30, 2019 at 1:53 AM fa201 [via LibreCAD] <[hidden email]> wrote:
You can use the support of a converter: for example https://www.rapidtables.com/convert/length/feet-to-inch.html
12 in = 1 ft so 1 ft = 48 * 1/4 in.
So you scale is 1/48.
Make sure the Tool Option bar is active and enter the scale 1/48 as shown.
If you reply to this email, your message will be added to the discussion below:http://forum.librecad.org/How-to-print-at-1-4-inch-1-foot-scale-tp5717550p5717551.html
| Free forum by Nabble | Edit this page |