Posted by Bilgerat984 on Mar 02, 2025; 7:40pm
URL: https://forum.librecad.org/Divide-Not-Working-tp5726654p5726663.html

I'm using v2.2.1.1 which was compiled 2/18/25.

There is only one layer & I made sure it was unlocked in LC. Here's the DXF file I tried to edit.

Fairy_outlne.dxf

I gave up & edited in raster with WinTopo. Here's the original picture I started with:


Here's the cur outline for the laser I finally created:
Fairy_cut_final.dxf

Since the laser can cut as well as engrave, I wanted to add a cut layer so the laser would do it all in one session.