LibreCAD › LibreCAD-user

Imported image not showing up

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

25 messages Options

LANDguy1

Imported image not showing up

The background image I insert shows as an empty black box. How do I get it to show up? I am inserting a jpeg.

Gary S

Re: Imported image not showing up

LibreCAD might be in draft mode. Try pressing [Ctrl]-[D] to toggle draft mode off and on.

LANDguy1

Re: Imported image not showing up

Thanks for your response, Gary. That didn't seem to work.

John

On Fri, Mar 12, 2021 at 3:31 PM Gary S [via LibreCAD] <[hidden email]> wrote:

LibreCAD might be in draft mode. Try pressing [Ctrl]-[D] to toggle draft mode off and on.

If you reply to this email, your message will be added to the discussion below:
https://forum.librecad.org/Imported-image-not-showing-up-tp5720354p5720355.html

To unsubscribe from Imported image not showing up, click here.
NAML

dellus

Re: Imported image not showing up

Have you moved the image you inserted? What do you mean with black box, a black frame or a black area?
Try and put the image file into the same folder as the drawing. The image is not integrated into the drawing file, it is just linked to it.

LANDguy1

Re: Imported image not showing up

Black area. Actually when I press Cntrl D a couple of times it still says draft mode at the top. Both files are in the same directory.

John

On Tue, Mar 16, 2021 at 2:39 PM dellus [via LibreCAD] <[hidden email]> wrote:

Have you moved the image you inserted? What do you mean with black box, a black frame or a black area?
Try and put the image file into the same folder as the drawing. The image is not integrated into the drawing file, it is just linked to it.

If you reply to this email, your message will be added to the discussion below:
https://forum.librecad.org/Imported-image-not-showing-up-tp5720354p5720385.html

To unsubscribe from Imported image not showing up, click here.
NAML

dellus

Re: Imported image not showing up

With Cntrl D you switch Draft on - off - on - off...
Hold Cntrl and then press D.
If your screen background is black the image will be black also with Draft.
Is the image shown in Print Preview?
Go to Tools - Modify - Properties and click into the image. What does it say? Is it an image at all? What's written in Path? Is it the right image?

dellus

Re: Imported image not showing up

In reply to this post by LANDguy1

Another possibility: maybe the jepg is incompatible somehow. Resave it externally as png and insert again or try with a different image.

LANDguy1

Re: Imported image not showing up

I've tried png and other images. I can't seem to get it out of draft mode. The path is right.

John

On Tue, Mar 16, 2021 at 4:53 PM dellus [via LibreCAD] <[hidden email]> wrote:

Another possibility: maybe the jepg is incompatible somehow. Resave it externally as png and insert again or try with a different image.

If you reply to this email, your message will be added to the discussion below:
https://forum.librecad.org/Imported-image-not-showing-up-tp5720354p5720388.html

To unsubscribe from Imported image not showing up, click here.
NAML

LANDguy1

Re: Imported image not showing up

In reply to this post by dellus

I also try to do a saveas to make it a dwg and can only get a dxf. I guess that is the draft mode that I can't get out of.

On Tue, Mar 16, 2021 at 5:44 PM John Hager <[hidden email]> wrote:

I've tried png and other images. I can't seem to get it out of draft mode. The path is right.
John

On Tue, Mar 16, 2021 at 4:53 PM dellus [via LibreCAD] <[hidden email]> wrote:
Another possibility: maybe the jepg is incompatible somehow. Resave it externally as png and insert again or try with a different image.

If you reply to this email, your message will be added to the discussion below:
https://forum.librecad.org/Imported-image-not-showing-up-tp5720354p5720388.html

To unsubscribe from Imported image not showing up, click here.
NAML

dellus

Re: Imported image not showing up

Again, does the image show in Print Preview, and is it being printed? This would indicate it indeed has something to do with Draft mode stuck.
Does it happen only with this particular file or is it always the case? Maybe LibreCAD is corrupted and a reinstall helps.
Is the drawing file coming from an other source than LibreCAD?
You could provide the file here for testing (you may clean out the contents), and the image.

LANDguy1

Re: Imported image not showing up

I did consider a reinstall which I will try next. It originated from another CAD program.

John

On Tue, Mar 16, 2021 at 7:12 PM dellus [via LibreCAD] <[hidden email]> wrote:

Again, does the image show in Print Preview, and is it being printed? This would indicate it indeed has something to do with Draft mode stuck.
Does it happen only with this particular file or is it always the case? Maybe LibreCAD is corrupted and a reinstall helps.
Is the drawing file coming from an other source than LibreCAD?
You could provide the file here for testing, you may clean out the contents, and the image.

If you reply to this email, your message will be added to the discussion below:
https://forum.librecad.org/Imported-image-not-showing-up-tp5720354p5720391.html

To unsubscribe from Imported image not showing up, click here.
NAML

LANDguy1

Re: Imported image not showing up

In reply to this post by dellus

overall_pln.dxf

I was not able to save as a dwg. I could not tell how to remove the image. I've attached a dxf (I think).

LordOfBikes

Re: Imported image not showing up

Administrator

LibreCAD does not support save as DWG, only reading.
So saving as DXF is correct and the only option to save drawings in LibreCAD.

^{investing less than half an hour into Search function can save hours or days of waiting for a solution}

dellus

Re: Imported image not showing up

In reply to this post by LANDguy1

You can not save as dwg in LibreCAD.

My posting was misleading. I did not mean to remove the image. Only the other elements. I asked to have the image provided too, to test if there is a problem with the image itself.

I could insert an image and it showed up with no problem.

Also no problem to switch Draft mode on and off.

Here is the file with the inserted image, and the image.
It is much smaller then your file. ? There must be something wrong with your file.

overall_pln_103.dxf
103.jpg

Gary S

Re: Imported image not showing up

This post was updated on .

In reply to this post by LANDguy1

I opened the file you provided and with the DRAFT mode on, I can see an outline for three images, one on each layer. With it off, nothing appears. I inserted one of my own JPGs (with a name corresponding to one of the other three). With draft mode on I get the outline, with it off I can see the image. However, once I save the file and reopen it - it ends up the same way as the other images - it doesn't appear. So, it is likely (?) the dxf file and not your installation.

I also saved the two file Dellus posted and have the same result - outlines in draft, but no images otherwise.

Q: If you use the "Properties" tool and select one of the images/outlines, does it show the path & filename? When I initially inserted an image it did, but after closing it and then reopening it, it does not.

dellus

Re: Imported image not showing up

If I reopen the file I have sent the image I inserted is shown. Of course you have to place the file 103.jpg into the same folder.

I think LANDguy1 didn't have the images in the same or original folder.

Gary S

Re: Imported image not showing up

This post was updated on .

Okay, weird. I had the files you provided in the same folder.

I opened the original dxf file in a text editor and the original image files have a fully qualified path, but the path doesn't show up in the "Properties" tool dialog. Does it for you?

I also noted the file size of the original file is 198.1 kB. Once opened and saved with LC it is only 17.6 kB.

dellus

Re: Imported image not showing up

Yes, they do.

LANDguy1

Re: Imported image not showing up

In reply to this post by dellus

It was all in the same folder

On Wed, Mar 17, 2021 at 5:44 PM dellus [via LibreCAD] <[hidden email]> wrote:

If I reopen the file I have sent the image I inserted is shown. Of course you have to place the file 103.jpg into the same folder.

I think LANDguy1 didn't have the images in the same or original folder.

If you reply to this email, your message will be added to the discussion below:
https://forum.librecad.org/Imported-image-not-showing-up-tp5720354p5720412.html

To unsubscribe from Imported image not showing up, click here.
NAML

dellus

Re: Imported image not showing up

LANDguy1, can you provide one of the images you had inserted for us to test, or is it a problem?

Does the file and the according image I have sent back work for you?

What OS and what LibreCAD version do you use?

I'm running out of ideas what could be the reason.